機械式雙柱式升降機設計【優秀課程畢業設計+含SW三維3D建模及8張CAD圖紙+帶開題報告+文獻綜述+答辯ppt+外文翻譯+33頁加正文1.24萬字】-jxsj15
【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】.bat
3D.stp
A0-裝配圖.dwg
A1-舉升機箱體.dwg
A1-大帶輪.dwg
A2-一級支撐懸臂.dwg
A2-升降臺.dwg
A2-螺桿.dwg
A3-小帶輪.dwg
A3-端蓋.dwg
SolidWorks建模
外文翻譯.DOC
開題報告.doc
文件清單.txt
文獻綜述.doc
答辯ppt.pptx
說明書.doc
摘 要
升降機是通過支撐物體的底部或者物體的某一部分來使物體達到垂直高度上的升降。其按驅動類型可分為機械式與液壓式兩類,本次設計主要是針對機械式雙柱升降機來開展工作。
機械式雙柱升降機主要由兩個舉升柱、兩個升降滑架、兩個托臂和兩個軌道式托板組成。通過帶傳動和絲杠的螺旋傳動將電機的動能傳遞給托板來實現被載物體的上升或下降。本次設計首先確定了升降機的結構、傳動方法以及鎖緊機構等設計方案;然后進行了詳細的計算和分析來保證升降機各部分的應力校核,使其能夠正常工作:最后為了使設計成果更加簡單明了地表達,繪制了總裝配圖、主要部件零件圖和三維裝配圖。
關鍵字: 升降機;螺旋傳動;帶傳動;絲杠
Abstract
The lift is an object that reaches the bottom of the object or a part of the object to lift the object up to the vertical height. According to the type of drive can be divided into mechanical and hydraulic type two, this design is mainly for mechanical double column lift to carry out the work.
The mechanical double column lift consists mainly of two lifting columns, two lifting carriages, two brackets and two rail pallets. Through the belt drive and screw screw drive the kinetic energy of the motor to the pallet to achieve the object to rise or fall. This design first determines the structure of the lift, transmission methods and locking mechanism and other design; and then carried out a detailed calculation and analysis to ensure that the various parts of the elevator stress check to make it work properly: Finally, in order to make the design more Simple and clear expression, drawing the assembly map, the main parts of the parts and three-dimensional assembly map.
Keywords: Lift; Screw drive; Belt drive; Screw
目 錄
摘 要 I
Abstract II
第1章 緒論 1
1.1 升降機的簡介及發展概況 1
1.2 升降機的分類 1
第2章 升降機設計任務和總體方案設計 3
2.1升降機設計任務 3
2.2舉升機總體方案設計 3
第3章 原動機的選擇 5
3.1選擇原動機類型和結構 5
3.2確定原動機的轉速及功率 5
第4章 帶傳動的設計 6
4.1帶傳動簡介及類型選擇 6
4.2帶傳動設計計算 6
第5章 舉升機構的設計 9
5.1舉升機構的選擇 9
5.2滑動螺旋副的設計計算 10
第6章 支撐機構結構的設計 14
6.1 支撐機構的結構 14
6.2 支撐機構的應力校核 15
第7章 導軌結構的設計 17
7.1導軌類型分析選擇 17
7.2 直線運動系統載荷計算 18
7.3 滾動直線導軌副壽命計算 19
第8章 鎖緊機構的設計 21
8.1 鎖緊機構的必要性 21
8.2 鎖緊機構的原理分析 21
8.3 鎖緊機構的選擇 22
8.4 鎖緊機構的校核 22
第9章 螺栓連接件的校核 24
9.1 升降臺與剖分式螺母套的螺紋校核 24
9.2 箱體與地基的螺紋校核選擇 25
結論 27
致 謝 28
參 考 文 獻 29













